Steel Reinforced Hose c/w Tails

Part Number: P7501XXX / P7400XX


  • Pre-cut lengths with crimped hose tails 
  • Available in 3/4″ or 1″ sizes
  • Steel reinforced for durability
  • Suitable for use with diesel and oils

Our steel reinforced hose has a helicoil of steel running through the wall to prevent it collapsing and restricting the flow.

Two-layer hose in thermoplastic PVC/PU/NITRILE rubber compound with embedded galvanised steel spiral and polyester yarn reinforcement for suction and delivery of oils, blue diesel, diesel and bio diesel.

The working pressures quoted within the chart are based on the short term burst pressures calculated at 23°C using a 4-to 1 safety factor.

Maximum recommended working temperature is 60°C. At temperatures above 55°C working pressures quoted would be affected. Below -25°C bend radius and flexibility would be affected.

Specification Sheet – DOWNLOAD HERE