Atkinson Bottom Outlet Filter Valve

Part Number: AFV-1000


  • For use on bottom outlet steel or plastic tanks
  • Includes PTFE Tape and Heldite for fitting
  • 50 micron filter included
  • Service kit available

Often supplied as standard with most major plastic tank manufacturers. For use on steel or bottom outlet plastic domestic heating oil tanks.

The tank must be installed with at least enough clearance beneath the filter bowl to allow for maintenance of the filter, including room for a tray to collect any spillage.

This Filter valve has been fully tested and was in full working order upon leaving our works; reasonable care in fitting and subsequent servicing will ensure trouble free operation.

Featuring an isolation valve, 50 micron nylon filter element, 1″ BSP male tank-fitting adaptor.

The outlet is 3/8″ BSP Female and this comes supplied with a 3/8″ BSP Male to 10mm compression fitting as standard.

Comes supplied c/w a roll of PTFE tape and a 10mm plastic bottle of Heldite for the tank connection.

AFV-1000 Fitting Instructions – DOWNLOAD HERE

Specification Sheet – DOWNLOAD HERE

Service Kit – 

Kit Includes:

• Isolation Valve
• 50 Micron Nylon Filter Element
• 1″ BSP Male Tank Fitting Adaptor
• 1 Roll of PTFE Tape
• 10mm Plastic Bottle of Heldite